Friday, October 31, 2008

Fixing Nissan Central Locking Problem

  1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds.

  2. Then turn ignition switch to OFF position.

  3. After 2 seconds, the system will enter programming mode and will flash the warning
    lights twice.

  4. Press and HOLD the unlock button on the Car key.

  5. While pressing the unlock button, press the lock button 3 times.

  6. Release the unlock button.

  7. The warning lights will flash once to indicate successful programming.

  8. Repeat procedure 4 to 7 for up to 4 car key’s.

  9. When completed turn ignition ON, and the warning lights will flash 2 times.

  10. Remove key, and check all car key’s for operation.

NOTE : The programming mode will stop when either the ignition is switch ON, 4 plip keyshave been programmed or no input signal either from the switch or plip keys has been received
for 120 seconds.